Filterkondensatoren aus metallisiertem Polypropylen

Filterkondensatoren aus metallisiertem Polypropylen (PP) in den Rastermaßen 27,5 mm bis 52,5 mm. 
Kapazitätswerte von 0,68 µF bis 75 µF. Nennspannungen von 230 V~ bis 440 V~.

Special Features

Electrical Data

  • High volume/capacitance ratio
  • High peak current capabilities
  • Self-healinge
  • Long lifetime
  • According to RoHS 2011/65/EU

Capacitance range:
0.68 µF to 75 µF 
Rated voltages:
230VAC, 275VAC, 305VAC, 350VAC, 440VAC 
Capacitance tolerances:
±20%, ±10%, ±5% 
Operating temperature range:
-55°C to +105°C
Climatic test category:
55/105/56 in accordance with IEC
Insulation resistance at +20°C:
> 30000 sec (MΩxµF)
Measuring voltage: 100V/1 min.
Test voltage: 
1.5 UrDC, 2sec
Test specifications: 
In accordance with IEC 61071 and 60068
Reliability:
Operational life > 60000 hours at Ur 
Failure rate < 10 fit (0.5 x Ur and 40°C)
Dissipation factors at +20°C: tan

Voltage derating:
A voltage derating factor must be
applied according to the graph:


Typical Applications

For high frequency applications e.g.

  • AC filtering in UPS systems
  • Harmonic filter
  • Welding equipment
  • Renewable energy - grid interface

Construction

Dielectric:
Polypropylene (PP) film

 

Capacitor electrodes:
Vacuum-deposited

 

Internal construction:

Encapsulation:
Solvent-resistant, flame-retardent plastic case
with epoxy resin seal, UL 94 V-0

Terminations:
Tinnes wire

Marking:
Colour: Red. Marking: Black. Epoxy resin seal: Red

at f PCM 27.5 PCM 37.5 PCM 52.5
1 kHz < 5 x 10-4 < 10 x 10-4 < 20 x 10-4
10 kHz < 30 x 10-4 < 75 x 10-4 < 150 x 10-4

Reference frequency 1 kHz in accordance with IEC 60384-1 
Maximum pulse rise time: for pulses equal to the rated voltage

PCM 230VAC 275VAC 305VAC 350VAC 440VAC
27.5 45 55 68 100 110
37.5 20 30 35 50 70
52.5 10 13 15 25 40

 

Mechanical Tests Packaging
Pull test on pins:
10 N in direction of pins according to IEC 60068-2-21
Vibration:
6 hours at 10...2000Hz and 0.75mm displacement amplitude or 10g in accordance with IEC 60068-2-6
Low air density:
1kPa = 10 mbar in accordance with IEC 60068-2-13
Bump test:
4000 bumps at 390 m/sec² in accordance with IEC 60068-2-29
Available taped and reeled up to and including case size 15x26x31.5 / PCM 27.5mm.